For sellers
Create double-sided and folded templates
Choose a front/back or folded layout and verify panel sizes and print orientation.
Choose the layout before designing. A front/back card, a side-fold card, and a tent-fold card have different arrangements. Save your current work before opening a new design.
Choose the format
In the seller editor, open File → New Design and choose:
- for a front/back pair. The format includes support for two-up printing.
- for two side-by-side panels forming a folded spread.
- for two panels arranged vertically for a top fold.
For independent pages without a folded arrangement, use Standard and multiple pages.
Set the dimensions
- In Set canvas size, choose the units and enter Width and Height.
- Review the layout preview and orientation before continuing.
- For a folded layout, read Size applies to each canvas. Enter the panel size, not the entire unfolded sheet size. Book Fold places two panels side by side; Tent Fold stacks two panels.
- Select Create template.
For example, two 5 × 7 inch Book Fold panels make a 10 × 7 inch spread before bleed. Confirm the printer's required finished and unfolded dimensions before building the artwork.
Design and check each side
For Double-Sided, use the Front and Back page navigation to work on both sides. For folded layouts, inspect each panel in the spread and keep text away from trim and fold edges.
Plan which panel is the front, back, or inside for the product you are making. Do not assume a particular printer's duplex setting or paper-feed direction from the on-screen appearance. Check the exported file and a physical folded sample before writing customer printing instructions.
Select Save, enter a name for a new template, and wait for saving to finish. Reopen it to confirm the layout and artwork.
Test the printable result
Follow print preparation. Download the intended PDF, review every page and panel, and check bleed and trim options. Test any Save Paper arrangement you plan to recommend.
Print a sample at the intended scale, using the printer's appropriate duplex or manual-feed settings. Cut and fold it to verify panel orientation and alignment. If the back is upside down, check the print flip/feed settings and the artwork orientation before changing the source design.
Attach template instructions explaining the tested setup and finish the pre-sale checklist. Printer settings vary, so describe the result buyers need to achieve rather than promising one universal setting.