For sellers
Prepare a template for customer downloads and print
Design for bleed, choose an export format, and check a finished file before selling.
Choose the intended finished dimensions before designing, then leave room for trimming and check the downloaded result. A good-looking editor view does not replace a print check.
Design with bleed in mind
For a printable template, open File → Settings → Show Bleed when available. Extend edge artwork into the bleed area and keep important wording and faces safely inside the finished edge. Do not crop artwork exactly at the trim line when it needs to print to the edge.
Templett's usual bleed adds 1/8 inch on each side: a 5 × 7 inch design becomes 5.25 × 7.25 inches when exported with that bleed. Confirm the printer's requirements before choosing export settings. See Bleed and trim marks.
Choose a download format
Save the design, then open Download:
- PDF is useful for print workflows and offers bleed, trim marks, and Save Paper options where supported.
- JPG produces an image; choose print quality for a printer that requests it.
- PNG is useful when its image format or transparency is required. Check the available quality setting rather than assuming every PNG is only suitable for the web.
Select the required pages and settings, then download. For step-by-step export instructions, see PDF, JPG, and PNG.
Inspect the actual file
Open the downloaded file and verify every page, dimensions, wording, image quality, and bleed. For folded or double-sided designs, check the page order and expected folding or cutting layout. If practical, print a sample at actual size rather than fitting it to the paper automatically.
Include the recommended format and any special print instructions in your seller instructions. Do not promise that one printer's settings suit every printer.